Waterproof General Purpose Acetoxy Adhesive Acetic Adhesive 100% Silicone Sealant 300ml
Main Usage:
1.Bonding and installation of kitchen,sanitary,aquariums etc..
2.Installation of general construction and decoration materials.
3.Other industrial application.
Construction Guide:
1.Can't be used for structural bonding assembly.
2.Don't apply to all of the surface with exudation,grease,plasticize and solvent.
3.Can't construct when the material surface temperature <4°C or >40°C.
4.Can't bonding the materials containing copper or copper alloy.
Product Features:
1. One-component, acidic room temperature curing. 2. It has excellent adhesion properties to glass and most building materials. 3. The silicone rubber elastomer formed after curing maintains excellent performance in the temperature range of -50 °C ~ +100 °C for a long time.
Scope of use:
1. Caulking sealing of indoor and outdoor decoration projects. 2. Aquarium and glass crafts production and installation. 3. Many other architectural and industrial uses.
Directions for use:
1. Before construction, the adhesion test of the sealant and the bonded substrate should be done to confirm the applicability of the product. 2. The substrate should be thoroughly cleaned with a solvent or a suitable cleaning agent, kept dry, and applied within 30 minutes after cleaning. 3. Sizing should ensure that the gaps are adequately filled so that the adhesive layer is dense, in close contact with the surface of the substrate, and trims the seams within 5 minutes after sizing. 4. Suitable for sizing temperature range 5 °C ~ 40 °C.
Restrictions on use:
1. Can not be used for structural bonding seals. 2. All materials containing oil or exudate should not be used. 3. Except for stainless steel and fluorocarbon spraying, alumina materials, can not be used for other metal materials or coated materials with a coated surface bonding seal. 4. Cannot be used for bonded sealing of mirror glass and glass coated surfaces.
Cautions:
1Please use this product in a well-ventilated environment. 2 The use of solvents should comply with the corresponding safety specifications. 3 Keep product out of reach of children. 4If you accidentally melt your eyes with uncured sealant, you should wash it immediately with clean water or consult a doctor.
Storage, transportation:
Storage period of 12 months, please use within the validity period; It should be stored in a dry, ventilated and cool place below 27 ° C, and transported as a non-dangerous goods.
Production date: See packaging spray code
Implementation standard: GB/T14683-2017
Solemn reminder:
Since the conditions and methods of using the product are beyond our control, the user must decide for himself the suitability of the product and the most appropriate method of use. The Company only guarantees that the Products comply with the relevant standards, and does not make any other express or implied warranties, and the Sole Compensation of the User is limited to the return or replacement of the Products. The Company expressly disclaims any liability for incidental or incidental damages.
| No | Test Item | Unit | Actual results |
| 1 | Appearance | - | Smooth, no air bubbles, no lumps |
| 2 | Tack free time(at what % humidity) | min | 4 |
| 3 | Slump | Vertical | mm | 0 |
| Horizontal | mm | Not deformed |
| 4 | Extrusion | ml/min | 1538 |
| 5 | Shore A hardness /72h | - | 26 |
| 6 | Shrinkage | % | / |
| 7 | Effect of heat aging on | - | |
| | - Weight loss | % | 13.0% |
| | - Cracking | - | No |
| | - Chalking | - | No |
| 8 | Tensile adhesion | Mpa | |
| | - Standard condition | | 0.54 |
| | - Immersion in water | | / |
| | - Dry at 100°C | / |
| 9 | Elongation at break | | % | 112 |
| 10 | Specific gravity | g/cm3 | 1 |
| 11 | Completely dry | hours | 16 |
| 12 | Temperature Resistence | °C | -50℃~150℃ |
| 13 | Application Temperature | °C | 4℃~40℃ |
| 14 | Color | | Transparent |
